How to Get More Horsepower From a 360 Magnum
- Install a performance aftermarket cold-air intake system. …
- Upgrade to performance aftermarket headers. …
- Install a performance aftermarket exhaust system.
In respect to this, Is a 5.9 Magnum a big block?
The 5.9 Magnum is a naturally aspirated 5.9L V8 engine that was produced by Chrysler from 1992 up until 2003. … The Magnum is built off of the Chrysler LA engine family, a group of pushrod overhead valve, 90 degree small block gasoline engines.
Furthermore, Are 318 and 360 Magnum heads the same?
318 and 360 magnum heads are the same casting. 58cc chambers and 1.92/1.625 valves. Your 360 heads are probably just 1.88/1.60 and something like 75cc. The magnums have a 1.6 ratio rocker arm so that will raise your cam lift .
Additionally, How long will a 5.9 Magnum last?
If maintained, it seems that 200,000 to 300,000 seems about right. It all depends on how well it has been taken care of. And there were two main issues with the magnum motors. The aluminum on steel belly pan caused the gasket to blow out.
How much horsepower can a 5.9 Magnum make? The Engine
Magnum 5.9 engines commonly carried a rating of 245 horsepower, with the tiny factory hydraulic roller camshafts delivering a hair over . 400-inch lift.
18 Related Questions Answers Found
How long will a Dodge 5.9 Magnum last?
If maintained, it seems that 200,000 to 300,000 seems about right. It all depends on how well it has been taken care of. And there were two main issues with the magnum motors.
How much horsepower can a 5.9 Magnum handle?
The Engine
Magnum 5.9 engines commonly carried a rating of 245 horsepower, with the tiny factory hydraulic roller camshafts delivering a hair over . 400-inch lift.
Is a Dodge 360 a good engine?
The Mopar 360 can make an excellent performance engine. It was introduced with a 2-bbl carburetor in 1971. Not intended as a performance engine, it also featured a cast crankshaft and low compression ratio (8.5 to 1) cast pistons. … In spite of this rocky start, the 360 can be built into an excellent street engine.
Can I put 360 heads on a 318?
Stock 360 heads are a great way to get power from a 318. Buit I would use them as a on the cheap method way to get there if the car/engine combo was track bound. A lack of low end torque is the result. In order to get past this weak area, a higher stall converter and gear ratio need to be installed.
How can you tell the difference between a 318 and a 360?
Another way is you could look at the harmonic balancer, if it is a skinny, flat one it is a 318, a 360 one will be thicker and have a counter weight on the face.
Are 5.2 and 5.9 Magnum heads the same?
nope. post 1994 magnum cylinder heads are the same on 5.2/5.9 engines.
How long will a Dodge 360 engine last?
I had 180,000 miles on mine before the accident. The motor will easily go 250,000 miles.
How many miles can a Dodge Ram 1500 last?
Ram 1500 pickups have proven to rack up mileage well over 300k miles without major engine or transmission repairs. There is no reason why most modern Ram 1500 engines can’t make it pass 300k miles with proper preventive maintenance.
Can you put a supercharger on a 5.9 Magnum?
ProCharger has you taken care of with bolt on, intercooled power for your 1997-2001 Dodge Dakota/Durango with the Magnum 5.9L or 5.2L engine. In fact, ProCharger offers the only intercooled supercharger system for the Magnum Dakotas & Durangos.
How can you tell a 5.9 Magnum?
All Magnum engines are stamped either 360 or 318 on the driver’s side near the rear of the block. The casting number found on all 360 Magnum blocks is 5302006, whereas the 5.2/318 Magnums are 53006714 or 53006657. Otherwise, the 5.2 and 5.9 appear pretty much identical.”
Is a Dodge Magnum a good car?
In reviews of the Dodge Magnum, our editors praised the vehicle’s roomy and comfortable interior, useful cargo area and inspiring performance. Though their fuel economy is naturally on the low side, the V8-equipped models are well suited for both long-distance cruising and stoplight encounters.
What oil does a 5.9 Magnum take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) SAE 10W-30 is preferred. 5W-30 (Below 0) |
|---|---|
| Capacity: | 5 quarts (with filter)After refill check oil level. |
| Torque: | 25 ft/lbs (Oil Drain Plug) |
Is a 318 and 360 the same block?
Nope, not the same. Bore size 318 is 3.91. Bore size 360 is 4.00. Crank is different as well.
Can you put 340 heads on a 318?
The 2.02 valves on a 340 head are complete overkill on a 318 unless you are running it constantly in the higher rpm’s. The larger valves can actually hurt your low end.
What engine is better 318 or 360?
the 318 engine has been known to be very reliable and I haven’t had any problems with mine and the 360 has a little more power and may get a little worse gas mileage but will move the truck a little better, but both a great for towing.
How much horsepower can a stock 318 handle?
It can easily make 400 plus horsepower and still has great street manners. If you’re building for fuel economy, the 318 beats the Mopar 340 and 360, hands down. The 318 was produced in three versions: polysphere, LA series, and Magnum.
Is a Dodge 318 and 360 the same block?
Nope, not the same. Bore size 318 is 3.91. Bore size 360 is 4.00. Crank is different as well.
How much horsepower does a 360 have?
The 360 featured an 8.7:1 compression ration and 255 horsepower at 4,400 rpm.
Don’t forget to share this post !
