How do you reset the StabiliTrak on a Chevy Silverado?

Step to Reset Service Stabilitrak Light

Step 1: Turn the handwheel clockwise. (If it shuts off, the vehicle does not need service, otherwise, follow the other steps.)
Step 2: Turn off the vehicle.
Step 3: Wait 15 seconds.
Step 4: Turn the vehicle on.

In respect to this, How much does it cost to fix electronic stability control?

How much does an electronic stability control repair cost? Electronic Stability Control Repair Costs: NHTSA estimates the average cost of installing a stock ESC on vehicles already equipped with ABS brakes will be approximately $ 111 per vehicle. Currently, the cost of optional equipment is around $ 300 to $ 800.

Furthermore, Why is my StabiliTrak and traction control light on?

Hello. The stability control and traction control warning lights can trigger for several reasons. … The ABS system works hand in hand with the traction control and it may have more to do with the ABS system then the traction control. Due to the lights flashing on and off, you may simply have a loose connection or wire.

Additionally, Can a bad wheel bearing cause traction control light to come on?

On many modern cars, a bad wheel bearing will trigger a warning light. The ABS or traction control warnings will often illuminate, since a bad bearing will trip the system to deactivate.

What is the purpose of StabiliTrak? StabiliTrak sensors monitor the steering wheel and direction of the vehicle, and they apply appropriate amounts of pressure to one side of the vehicle rather than just certain wheels. It’s impossible to have stability control and traction control without the anti-lock braking system.

19 Related Questions Answers Found

How do I fix my electronic stability control light?

If the ESC light stays on after you replace the battery, don’t panic. All you need to do is drive the car for a few minutes and make sure to make several left and right turn. Once the system does a self-check, it should reset the stability light on its own.

How do I reset my electronic stability control?

If you need to turn off the ESC system, you can do so by pressing and holding the “ESC Off” switch for five seconds. After doing this, an “ESC Off” alarm will appear on the odometer, and the ESC warning light will illuminate.

How do you reset ESP?

How to Reset the ESP® Light

Find the ESP® button.
Press it and hold it down for five seconds.
This will reset the light.

Where is the traction control sensor located?

In some vehicles it is located under the hood and/or is a part of the ABS control module. Other vehicles may have the traction control module located in the interior or trunk areas.

What does service stability mean?

What does service stability system warning on a Cadillac mean? The stability system is basically an addition to your abs brake system. It operates by adding additional sensors such as a steering wheel position sensor and a yaw sensor and is designed to determine if the vehicle is losing directional control.

How do I know if my wheel speed sensor is bad?

Noted below are a few of the warning signs of a bad or failing wheel speed sensor for your review.
…
Symptoms of a Bad or Failing Wheel Speed Sensor

ABS Light is illuminated on the dashboard. …
ABS does not work properly. …
Traction Control Light is active.

How much does it cost to fix the traction control system?

The average price for a traction control switch replacement cost typically ranges between $80 and $90 for most makes, models, and years of vehicles. This fix’s total labor cost is between $38 and $48, while the cost of the parts is generally priced at around $43.

Can you fix a wheel speed sensor?

Replacing a wheel speed sensor is a very straightforward job with the right tools and knowledge. But if it’s something you don’t want to tackle on your own, the professional mechanics at YourMechanic can complete the wheel speed sensor replacement for you.

Is there a recall on StabiliTrak?

Roughly 500,000 vehicles with StabiliTrak remain on the road

This is according to automotive marketing firm Hedges & Company. A company employee interviewed by Reuters says GM chose not to issue a recall because GM’s probe was inconclusive as to what caused the accident.

What does it mean when your truck says service StabiliTrak?

What to do about a Service StabiliTrak message. This message means there is a malfunction. Sometimes you can fix a StabiliTrak with a simple power cycle. Start by pulling over, and turning your Chevy off.

How do I turn off my stability control light?

This may vary by the manufacturer of your vehicle. If equipped, there should be a switch/button showing a picture of a car with wavy lines underneath. Press this button to turn off traction control. This should then display the light on the dash as a steady yellow light indicating the TC is now turned off.

What does electronic stability control light mean?

Typically, cars that have ESC have an indicator light on the dashboard. … If the ESC light stays on, it means your vehicle is not under control. And if the ESC light stays on for an extended period of time, your ESC may be malfunctioning, or the system has been manually deactivated.

Why wont my traction control light go off?

When this warning indicator light comes on in the dashboard, this could be an indication of several issues such as faulty wheel speed sensors, a faulty steering angle sensor, a faulty rotational speed sensor or a problem with the steering rack.

How do I turn off stability control?

If both front wheels get stuck in fresh snow or mud, you may need to turn off both Traction Control (also know as TRAC) and Vehicle Stability Control (VSC) so you can rock the vehicle to free it. To turn TRAC off, simply push and release the VSC OFF button. The “TRAC OFF” indicator light should come on.

Where is the ESP sensor located?

It is located in the engine compartment. The control unit takes over the electrical and electronic tasks as well as all control functions of the system.

What causes ESP malfunction?

ABS Wheel Sensor – The ABS wheel speed sensors can fail and cause the ESP light to turn on. … Low Battery Voltage – If you have an old Mercedes-Benz battery which is not supplying the needed voltage you can cause ESP malfunctions and a variety of other problems such as ABS and ETS warnings.

Can you reset a steering angle sensor?

Test drive: Newer vehicles with more advanced wheel speed sensors may automatically reset their own steering angle sensor the next time the vehicle is driven in a straight line for a set period. … Diagnostic scan tool reset: A scan tool reset may be required on some vehicles.

What causes traction control to malfunction?

Traction control and ABS most commonly develop problems with the wheel speed sensors. These sensors are moderately exposed to the elements, leaving them slightly vulnerable. The magnetic operation on the traction control sensors or Anti-lock Braking sensors can be interrupted by dirt or other buildups.