The stock Mustang GT block has been known to handle up to 500 flywheel horsepower. However, this is flirting with disaster. Granted, with the proper mods the 4.6L can handle well over 1000 rwhp! Not bad for a stock cast block, especially one with the revving capability of the 4.6L.
Subsequently, Is a 4.6 A good motor?
The Ford 4.6 V8 was the first engine in the Ford Modular engine family. It hit the markets back in 1991 and remained in production through 2014. … It’s also a pretty reliable engine that Ford trusted to power many flagship cars for over 20 years. However, no engine is perfect and there aren’t any exceptions here.
then, How much boost can a 2v 4.6 handle?
Stock block 4.6L 2v should be limited to 450rwhp max. Even that is stressing the engine.
Thereof How much HP can a 4.6 2v crank handle? Yes they are cast steel but they can handle quite a bit of horsepower. Its the rods that let go around 450-500 at the rear wheels. The crank itself will be safe way beyond that.
How much does it cost to rebuild a 4.6 Ford engine?
Building a 4.6L Modular V-8 costs $4,500 to $15,000, depending on your performance goals.
16 Related Questions Answers Found
Is a 4.6 L V8 a good engine?
Ford’s Modular 4.6 V8 has earned a highly positive reputation amongst owners in terms of reliability and longevity. The engine can easily run well over 200,000 miles. Some taxi services used Crown Victorias with 4.6 V8 until impressive 300,000 or even 400,000 miles.
How long does a 4.6 V8 last?
They would be installed in Crown Victorias and police would keep them for about 130,000 miles. They would then be converted into taxicabs and get up to about 300,000 miles to 400,000 miles before they were finally retired. Clearly, the Ford 4.6 engine was designed to last for the long haul.
What size motor is a 4.6 L?
The 4.6L engine displaces 281 cubic inches, and it has a 3.552-inch bore and a 3.543-inch stroke. Aluminum engine blocks are 68 pounds lighter than iron blocks (86 pounds and 154 pounds, respectively).
How many miles will a Ford 4.6 last?
Registered. Around 90-100k the valve seals and rings start to show their age by puffs of smoke on take off and comsumption. But they will last past 250k easy, as long as the oil is changed regularly. The oil usage is common for all the 4.6s though.
Can you supercharge a stock 4.6 Mustang?
With ProCharger’s revolutionary intercooled supercharger system for your 4.6L 2V Mustang, you will experience a 55-80% increase in horsepower at 8-12 psi while running high quality pump gas on an otherwise stock engine.
How much HP can a 2001 Cobra handle?
The stock 4.6L 4v aluminum block motor can handle 500-550 rwhp.
How much power can a 460 block handle?
Depending on engine combo, engine application, components used, compression ratio, hp generated, operating rpms, executed block modifications/preparation/treatment, power adders, tune, and more: the 2-bolt blocks can support anywhere between 300hp-1500hp.
How much power can a T45 handle?
T45 can handle as much as 650 HP.
How much HP can a 2019 Mustang GT handle?
The new performance product will raise the muscle car’s output to 700 horsepower and even carries a warranty if installed by a Ford dealer.
How much horsepower does a 4.6 have?
Ford 4.6L Modular V-8 Specs
| Engine: | 4.6L 16v SOHC, 24v SOHC, 32v DOHC |
|---|---|
| Ignition: | Individual coil-on-plug ignition system |
| Fuel System: | Sequential multi-port fuel injection |
| Engine Oil Capacity: | 6 quarts w/ filter |
| Peak Horsepower: | 210 hp @ 4,400 rpm (F-150 2v, 1997) 292 hp @ 5,700 rpm (F-150 3v, 2010) |
Are all 5.4 blocks the same?
The 5.4L iron block was cast, machined, and assembled at Windsor only. … All 4.6L and 5.4L SOHC Modular engines employ the same basic blocks, meaning you can bolt any SOHC 3V head on any Romeo or Windsor block, which gives you a lot to choose from. Romeo iron blocks were cast at the Cleveland Iron Foundry (CF).
Is a 4.6 a V8?
The Ford 4.6L engine is a naturally aspirated V8 from Ford Motor was used to power a variety of different vehicles like sports cars, pickup trucks, sport utility vehicles, luxury sedans and cargo vans.
Is 4.6 or 5.4 engine better?
The 4.6 is TOO gutless IMO…the 5.4 is much more torquey and you won’t regret your decision whenever you put your foot down. Any issues with these engines is cause by people not knowing how to properly maintain them…not a design flaw.
How many valves does a 4.6 2v V8 have?
The 4-valve DOHC version of the Modular engine was introduced in the 1993 Lincoln Mark VIII as the 4.6 L Four-Cam V8.
How much horsepower does a 4.6-liter V8 Mustang have?
The Mustang GT’s 4.6-liter V-8 produces 215 horsepower at 4,500 rpm and 290 pound-feet of torque at 3,250 rpm. The Cobra’s engine spawns 305 horsepower at 5,800 rpm and 300 pound-feet of torque at 4,800 rpm.
Is a 4.6 a v6 or V8?
The Ford 4.6L engine is a naturally aspirated V8 from Ford Motor was used to power a variety of different vehicles like sports cars, pickup trucks, sport utility vehicles, luxury sedans and cargo vans.
Is a Ford 4.6 an interference engine?
Per the OEM Manuals, the 4.6L is an interference engine. Remember that the timing chains have self-adjusting hydraulic tensioners, so there isn’t a lot of slack when the get worn.
How many miles do V8 engines last?
Most engines on the road today are designed to last well over 100,000 miles. An engine will last much longer if the engine is not abused in any way and all maintenance that the manufacturer recommends is done on or before it is due.
Don’t forget to share this post !
