The crank is forged, so with pistons and rods you should be able to bump it on up to 10-12 psi. This should net you 650+ rwhp with a good tune.
In respect to this, How much HP can you get out of a 392?
The Dodge Challenger 392 Scat Pack with 6.4L HEMI V-8 specs are 485 hp and 475 lb-ft of torque. The Challenger Scat Pack on the dyno tested at 331 whp (to the wheels) and 421 lb-ft of torque.
Furthermore, What’s the difference between Challenger Scat Pack and SRT 392?
Q: What’s The Difference Between SRT And Scat Pack? A. … SRT represents several levels of performance of the Charger, Challenger, and Durango and offers the bat-poop crazy Hellcat models. Scat Pack, however, is essentially a performance trim for the Charger and Challenger.
Additionally, Is the 392 Hemi a good engine?
The 392 HEMI is a reliable engine. We’re classifying the problems as a few of the most common. That’s not to say any of these problems affect a large percent of 6.4 HEMI engines. Also, other failures can and do happen from time to time so this is by no means an exhaustive list.
How much HP can a RT Challenger handle? Meanwhile the Dodge Challenger RT features a 5.7L Hemi V8 Engine that forks out 375 Horsepower, and 410 lb. -ft of torque.
22 Related Questions Answers Found
Is the 392 Hemi a reliable engine?
The 392 HEMI is a reliable engine. We’re classifying the problems as a few of the most common. That’s not to say any of these problems affect a large percent of 6.4 HEMI engines. Also, other failures can and do happen from time to time so this is by no means an exhaustive list.
Does the 392 Hemi have forged internals?
The bore and stroke are 4.09 inches and 3.72 inches on all 6.4L/392 HEMI engines. They also come stock with a forged-steel crankshaft that can take a lot of punishment. … Like the 6.1L HEMI engine, the newer 6.4L/392 HEMI engine requires premium fuel for best performance.
How fast is a scat pack?
2020 Dodge Challenger R/T Scat Pack Cons
| 2020 Dodge Challenger R/T Scat Pack Specifications | |
|---|---|
| ON SALE | Now |
| WEIGHT | 4,236 lb |
| 0-60 MPH | 4.5 sec |
| TOP SPEED | 185 mph (est) |
• 14 oct. 2020
Is the SRT 392 faster than the Scat Pack?
The Challenger SRT 392 (top) trumps the R/T Scat Pack in terms of equipment and accessories, but not power; both Dodge coupes boast a 485-horsepower 6.4-liter V8. Sometimes, one letter can make quite a difference.
Is a Scat Pack better than an SRT?
Despite the significant price savings, the R/T Scat Pack gets the same power as the more expensive SRT 392 model, though it gives up some of the handling and braking equipment as well as some creature comforts. A base Challenger R/T with the 375-hp, 410-lb-ft 5.7-liter Hemi V-8 is priced from $32,490.
Which is faster 392 or Hellcat?
The engine on the SRT 392 is the second most powerful engine in the Challenger lineup. … The Dodge Challenger SRT Hellcat is the fastest production muscle car available today. The SRT Hellcat is equipped with a 6.2-liter V8 Hemi Hellcat engine that cranks out 707 horsepower and 650 lb-ft of torque.
How long do 392 Hemi engines last?
These engines are built really robust, yet intelligent. They are actually quite overbuilt and endure rigorous testing for longevity. These engines are built to last so as the years roll on, you should see more and more Hemi’s with 300K miles running around.
Is the SRT faster than the Scat Pack?
The Engine Differences
The Scat Pack offers 485 horsepower and 475 lb-ft of torque and provides a quarter-time of 12.40 seconds at a top speed of 115 mph. The Scat Pack is no match versus the 707 horsepower with the SRT Hellcat, which goes through a quarter-mile in just 10.96 seconds.
How long will a 6.4 Hemi last?
The maximum mileage you can expect from a 6.4 V8 Hemi is anything in excess of 250 000 miles.
How much horsepower can a 5.7 Hemi make?
How much HP can a 5.7 Hemi have? The maximum HP you can add to the 5.7 HEMI engine is 650HP.
How do you get a 700 horsepower out of a 5.7 Hemi?
To get 700 you’re gonna need to definitely stroke and forced induction. I would start with a 6.1 or 6.4 engine as a base and go from there. I had an 08 Charger with a 5.7 based 392 stroker and with tuning and fine parts selection I was able to get 500 rear wheel torque and horsepower all naturally aspirated.
Can a 5.7 Hemi handle a turbo?
Yes. The only changes from the stock engine are a boosted fuel pump and bigger injectors. The internals are all stock. The kit runs 8 lbs of boost.
Is RT better than SRT?
Both the RT and SRT® trims feature upgraded performance over the standard Dodge trims, but the RT, which stands for Road and Track, comes with a more affordable price with a bit less power than the SRT®. You’ll find upgraded engines, suspensions, tires, and brakes.
Is 392 Hemi a big block?
The 392 is nothing like a big block. Even by the displacement number, it would be on the runt side for big block displacement.
What does 392 mean on a charger?
SRT 392 = 6.4L HEMI V8 powered by SRT
Engine displacement is the volume of the vehicle’s cylinders and/or the volume of air displaced by the action of the pistons.
Is a Scat Pack faster than a Camaro SS?
The Scat Pack hit 60 mph in 4.2 seconds and pummeled the quarter mile in 12.6 seconds at 112.3 mph. … The Camaro also hit 60 mph in 4.4 seconds and lost the quarter mile to the new ‘Stang by a tenth of a second, 12.9 seconds at 110.5 mph.
Is a Scat Pack faster than a hellcat?
The Scat Pack offers 485 horsepower and 475 lb-ft of torque and provides a quarter-time of 12.40 seconds at a top speed of 115 mph. The Scat Pack is no match versus the 707 horsepower with the SRT Hellcat, which goes through a quarter-mile in just 10.96 seconds.
What’s the difference between RT Scat Pack and SRT 392?
Q: What’s The Difference Between SRT And Scat Pack? A. … SRT represents several levels of performance of the Charger, Challenger, and Durango and offers the bat-poop crazy Hellcat models. Scat Pack, however, is essentially a performance trim for the Charger and Challenger.
Don’t forget to share this post !
