Is scat pack faster than SRT?

The Scat Pack offers 485 horsepower and 475 lb-ft of torque and provides a quarter-time of 12.40 seconds at a top speed of 115 mph. The Scat Pack is no match versus the 707 horsepower with the SRT Hellcat, which goes through a quarter-mile in just 10.96 seconds.

Subsequently, Which is better scat pack or 392?

The Challenger SRT 392 (top) trumps the R/T Scat Pack in terms of equipment and accessories, but not power; both Dodge coupes boast a 485-horsepower 6.4-liter V8. … Sometimes, one letter can make quite a difference.

then, What does 392 stand for?

SRT 392 = 6.4L HEMI V8 powered by SRT

The displacement of the SRT 392 engine is 392 cubic inches, which can also be expressed as 6.4-liters.

Thereof Which is faster 392 or Hellcat? The engine on the SRT 392 is the second most powerful engine in the Challenger lineup. … The Dodge Challenger SRT Hellcat is the fastest production muscle car available today. The SRT Hellcat is equipped with a 6.2-liter V8 Hemi Hellcat engine that cranks out 707 horsepower and 650 lb-ft of torque.

Is the 392 Hemi a reliable engine?

The 392 HEMI is a reliable engine. We’re classifying the problems as a few of the most common. That’s not to say any of these problems affect a large percent of 6.4 HEMI engines. Also, other failures can and do happen from time to time so this is by no means an exhaustive list.

20 Related Questions Answers Found

Why is it called 392?

The SRT 392 engine was specially engineered by Fiat Chrysler’s advanced street and racing technology (SRT) team and it’s partially named after its 392 cubic-inch engine. The Charger SRT 392 is powered by a 6.4L V8 SRT HEMI MDS engine that generates 485-horsepower and 475 lb-ft of torque.

How much horsepower can you get out of a 392 Hemi?

The 392 Hemi V8 is a 6.4L engine that delivers 485 horsepower with 475 lb-ft of torque.

Is Dodge 392 a big block?

The 392 is nothing like a big block. Even by the displacement number, it would be on the runt side for big block displacement.

Is the Scat Pack supercharged?

Q: Is the Scat Pack Supercharged? A. No, the Challenger R/T Scat Pack features a naturally aspirated 6.4-liter V8 that makes 485 horsepower at 6,100 rpm. The Challenger SRT Hellcat, however, features a supercharged 6.2-liter V8 that makes 717 horsepower.

What does a scat pack mean?

Popularly known as two Dodge Challenger and Dodge Charger trims, the term Scat Pack was derived from the term “scat,” such as “Get lost, scat!” and was a play on Frank Sinatra’s “Rat Pack”. … Later, for a Dodge model to wear the term “Scat Pack,” it had to be able to run a quarter mile in 14 seconds or less.

How fast is a 392 Hemi Charger?

Performance

0 – 60 mph	4.3 s
0 – 100 mph	9.2 s
1/4 mile	12.4 s @ 115.0 mph
Top speed	282 kph (175 mph)

How long do 392 Hemi engines last?

These engines are built really robust, yet intelligent. They are actually quite overbuilt and endure rigorous testing for longevity. These engines are built to last so as the years roll on, you should see more and more Hemi’s with 300K miles running around.

Is RT better than SRT?

Both the RT and SRT® trims feature upgraded performance over the standard Dodge trims, but the RT, which stands for Road and Track, comes with a more affordable price with a bit less power than the SRT®. You’ll find upgraded engines, suspensions, tires, and brakes.

How long will a 6.4 Hemi last?

The maximum mileage you can expect from a 6.4 V8 Hemi is anything in excess of 250 000 miles.

Is the 392 Hemi a good engine?

Is a hemi better than a V8?

5.7L HEMI V8 Engine

As far as towing capacity goes, the HEMI can haul more than 10,000 pounds of whatever you can strap down. … Things like a lower price and better fuel efficiency make the V6 sound enticing, while the more expensive but beastly V8 could suit your needs better, especially if that need is raw power.

Is the 392 a good engine?

In 2011, FCA began using the 392 Apache in production models beginning with the Dodge Challenger SRT8. Since then the engine found its way into many flagship performance models and trucks. It’s a stout engine that provides respectable performance and reliability.

How can you tell a 392 Hemi?

The 6.2L/392 HEMI blocks can be identified with casting number 5037473BE or 5037473BG and has “6.4L” cast above the oil pan rail. Like the 6.1L HEMI engine it replaced, the 6.4L/392 HEMI blocks come painted orange and are machined and assembled at FCA’s Saltillo Engine Plant.

How much power can a scat pack handle?

When equipped with the available naturally aspirated 392 HEMI® V-8 engine, the Challenger R/T Scat Pack and Scat Pack widebody models deliver 485 horsepower on the road.

Can a 392 Hemi handle a supercharger?

ProCharger has increased the power levels with the Stage II Dedicated Drive System and tuner kit for the 6.4L (392) Hemi. The installation of the ProCharger Stage II supercharger can push the horsepower to 800, 900, 1,000, or even over 1,200.

Why was the Hemi banned from Nascar?

According to various sources, the Hemi was banned “not for technological reasons, but because it wasn’t readily available in cars from Dodge or Plymouth assembly lines, ‘readily’ being the key concept.” The thrust of the argument being that it was too costly of an option for the average buyer.

Do Scat packs hold value?

In fact, both Charger and Challenger Scat Packs have pretty great resale value. A look at used car listings shows that even a four or five year old example with nearly 50,000 miles on it is still hard to find for under $30,000. That means that if you buy one at the right price, there really isn’t a whole lot to lose.

What does Scat Pack stand for?

Scat Pack. Popularly known as two Dodge Challenger and Dodge Charger trims, the term Scat Pack was derived from the term “scat,” such as “Get lost, scat!” and was a play on Frank Sinatra’s “Rat Pack”. … Later, for a Dodge model to wear the term “Scat Pack,” it had to be able to run a quarter mile in 14 seconds or less.