“That led us to a torque-per-liter value and a power-per-liter value, [which] knowing that, boxed us to 7.3 liters.” For fuel efficiency’s sake, Ford engineers determined they wanted the engine to generate peak power at what Beltramo considers “relatively low” RPMs. “That’s what led us to a pushrod two-valve.
In respect to this, How good is the Ford 6.2 engine?
6.2 Boss V8 Reliability
In our opinion, the Ford 6.2L V8 is a reliable engine. It’s built to power higher-end F150 models like the SVT Raptor and Super Duty trucks, such as the F-250 and F-350. Most Ford 6.2 engines live a rough life, but “built Ford tough” applies to this engine.
Furthermore, Is the Ford 7.3 a good engine?
According to TheDrivingLine.com, the 7.3 liter Powerstroke is reliable because its design is simple and only uses 6 bolts per cylinder. Another reason trucks with these engines are durable is that they feature a fixed geometry turbo and an oil cooler that is located externally.
Additionally, Why is 7.3 diesel so good?
Robust, iron parts, conservative power and low engine speed are the key ingredients for any diesel engine lasting forever—and if a 7.3L has gone unmodified yet been well maintained its entire life, 400,000 to 500,000 miles is virtually guaranteed.
How much HP can a 7.3 make? Ford’s 7.3-Liter V-8 Can Make 600 Naturally-Aspirated Horsepower With Basic Mods. The giant gasoline V-8 in Ford’s new Super Duty pickups can make huge naturally-aspirated power—and it can fit in a Fox-body Mustang.
20 Related Questions Answers Found
How many miles will a Ford 6.2 last?
If you treat your truck right and routinely service it, your 6.2-liter will last up to 500,000 miles. Though, if you treat it like an ordinary work truck and beat the ever-living hell of out it, it won’t last long.
Does the Ford 6.2 Require premium fuel?
GM recommends using 93 octane gasoline for its top-of-the-line 6.2-liter V-8-equipped trucks. The owner’s manual does state as low as 87 octane is acceptable for the engine. However, to achieve maximum performance and fuel economy you must use 93.
Why does Ford 6.2 have 16 spark plugs?
The 6.2L V-8 employs two spark plugs per cylinder (16 total for the engine) in order to maximize combustion efficiency, which directly impacts performance, fuel economy, and emissions.
Is 6.0 or 7.3 engine better?
From a reliability, durability or simplicity standpoint, the 7.3L is hands down the winner. When it comes to horsepower, drivability and meeting modern day emissions standards, the 6.0L has it beat. Ultimately, both engines have their pros and cons.
Why was the 7.3 Powerstroke discontinued?
The 7.3 L DI Power Stroke was in production until the last quarter of model year 2002 when it was replaced by the 6.0 L in 2003 because of its inability to meet California noise regulations, not the commonly believed emissions standards as it beats the current 6.7 L Power Stroke.
What powerstroke to avoid?
Stay away from the 6.0’s(commonly known as 6-leakers) and the 6.4’s(commonly known as sootbags). I believe that the 2002/2003 7.3 powerstroke is one of the best diesels ever made, even with the tranny situation.
Is it bad to let a 7.3 idle?
You definitely do not want to let the engine run on low idle for long periods. That is just plain bad for any diesel engine. You can run the engine all day, but you need to get the RPM up to get the motor internals heated up.
Is Ford making the 7.3 again?
Ford’s 7.3-liter truck engine is back, and this time it’s a gas. This is deliberate. Ford could’ve designed its new big-bore gasoline truck engine to any size it wanted, but it chose to give each cylinder a 4.22-inch bore and a 3.98-inch stroke.
Is 6.0 or 7.3 Powerstroke better?
From a reliability, durability or simplicity standpoint, the 7.3L is hands down the winner. When it comes to horsepower, drivability and meeting modern day emissions standards, the 6.0L has it beat. Ultimately, both engines have their pros and cons.
What RPM should a 7.3 idle at?
Premium Member. Normal idle on a stock truck, when it is up to temp, should be around 680 RPM.
Is the Ford 6.2 a big block?
So to break the modular displacement barrier, Ford has gone to a fundamentally larger architecture. In the 6.2, that translates into a 4.02-inch bore. We’ve come to think of the 6.2-liter as a big-block modular. Of course, the only modular architecture making it through to the 6.2 is the bellhousing bolt pattern.
How much horsepower does a 6.2-liter Ford engine have?
Engine Specs & Differences
| Engine | 6.2L SOHC 2-Valve Flex Fuel V8 | 6.7L Powerstroke V8 Turbo Diesel |
|---|---|---|
| Horsepower | 385 HP | 475 HP |
| Torque | 430 lb.-ft. | 1,050 lb.-ft. |
| Max. Towing Capacity | 15,000 lbs. | 20,000 lbs. |
How many spark plugs does a Ford 6.2 L have?
Well, the Ford 6.2L V-8 uses a “wasted spark” type ignition system, with two spark plugs per cylinder. The main spark plug is located in the top of the cylinder, where you’d typically find a spark plug. The second one is lower on the cylinder head, right above the exhaust valve.
Is the GMC 6.2 engine problems?
Unfortunately, the GMC Envoy has its share of issues with the 6.2 engine. Some of those issues include: The engine idling rough, – vehicle owners were reportedly told it was due to a cylinder misfire. The vehicle’s engine may develop a misfire because of worn valve seats.
Is the GM 6.2 a big block?
Between 2007 and 2017, the LS3 was used in high-performance vehicles, such as the Camaro and Corvette, among others. It is part of GM’s Gen IV engine family, and is the successor to the 6.0 liter LS2 V8, with strengthened casting and larger bores.
…
GM 6.2 Liter V8 Small Block LS3 Engine.
| Type: | 6.2L Gen IV V8 Small Block |
|---|---|
| Assembly site: | St. Catharines, Ontario |
Is the Chevy 6.2 a big block?
The Chevrolet Silverado 1500 6.2L Packs a Big Engine in a Big Truck. Chevy’s largest-displacement gas V-8 provides real muscle for its full-size pickup.
How much horsepower does a 6.2 liter Ford engine have?
Engine Specs & Differences
| Engine | 6.2L SOHC 2-Valve Flex Fuel V8 | 6.7L Powerstroke V8 Turbo Diesel |
|---|---|---|
| Horsepower | 385 HP | 475 HP |
| Torque | 430 lb.-ft. | 1,050 lb.-ft. |
| Max. Towing Capacity | 15,000 lbs. | 20,000 lbs. |
How much horsepower is a 6.2 liter engine?
GM 6.2L EcoTec V-8 Specs
| Engine: | General Motors 6.2L EcoTec3 V-8 |
|---|---|
| Emissions Equipment: | catalytic converter, positive crankcase ventilation (PCV) |
| Max Engine Speed: | 6,000 RPM |
| Peak Horsepower: | 420 HP @ 5,600 RPM |
| Peak Torque: | 460 lb-ft @ 4,100 RPM |
Don’t forget to share this post !
